UM15M7

Project Service UM15M7 Board è basato su processore ST STM32F746NG (ARM Cortex-F7) adatto per una vasta gamma di applicazioni industriali.

Il PJS-UM15M7-STM32 è un SOM ad alte prestazioni con l’obbiettivo di fornire una piattaforma flessibile per applicazioni embedded che richiedono connettività così come elevata potenza di calcolo e di elaborazione grafica.

Specifiche Prodotto


Processor
  • ST Microelectronic STM32F746 (Single ARM®Cortex™-M7Core, up to 216MHz)
Memory
  • 32MByte SDRAM, 32-bit databus
  • 64 MByte QSPI NOR Flash
Graphics output
  • Parallel RGB: 24-bit up to XGA (1024 x 768 px)
  • Chrom-ART Accelerator™ for enhanced graphic content creation (DMA2D)
Ethernet
  • 10/100 Mbps Ethernet interfaces based on Microchip KSZ8081RNAIAEthernet PHY
I/O
  • UM15M7 peripherals (see PJS_UM15M7 Datasheet for details about peripherals):
  •  1 x USB 2.0 full-speed, device/host/OTG controller with on-chip PHY
  • 1 x USB 2.0 high-speed in full-speed, device/host/OTG with on-chip full-speed PHY
  • 1 x SD/SDIO/MMC card host interface
  • Serial interfaces (SPI, I2C, UART)
  • CAN Bus
  • ADC
  • PWM
  • See PJS_UM15M7 Datasheet for details about available pins/peripherals.
Mechanical
  • 40 x 40 x 6 mm (W x D x H) compact module
Power
  • +3.3V power supply voltage
  • Power consumption: TBD
Connectors
  • External Interface using two 80-pin 0.5mm pitch connectors – FCI-61082-081402LF
  • 10 pos, 1.27mm pitch for JTAG
  Environment
  • Operating Temperature: 0 – 60 degrees Celsius (standard) or -40 to +85 degrees Celsius (on request)
Other
  • On-board 2K bits I2C™ Serial EEPROM with EUI-48™ Node Identity
  • Mounting holes reducing the risk of connector-to-PCB intermittence
  • Compliant with the Restriction of Hazardous Substances (RoHS) directive

Download datasheet

Download file ZIP

Richiedi maggiori informazioni su questo prodotto

  • Questo campo serve per la convalida e dovrebbe essere lasciato inalterato.
Torna su